OtterBox Armor 3600 PDA Case
Heavy
duty, ruggedized PDA protection, compatible with Garmin iQue
3200, iQue 3600,
iQue M5 (with antenna
fully extended). Available in yellow or black.
•
Easily use PDA through recessed, flip-upclear plastic screen
• Portals for printer, GPS, other cable connections
• Waterproof, dustproof & airtight
• Indestructible, reinforced ABS plastic
• Rubber overmolding for a secure grip
• Crushproof
• Secure stylus holder on outside of 3600
• Adjustable Velcro hand strap - easy to use with gloves
• Uunconditional lifetime guarantee
• Colors: Fluorescent Yellow, Midnight Black
Dimensions:
• Internal: L 6.75" - W 3.6" - D 1.125" (L
171.5mm - W 91.5mm - D 28.5mm)
• External: (L 8.5" - W 1.37" min (W 5.25"
max) - D 2.4" (L 216mm - W 111mm min (W 133mm max) - D 61mm]
Download
full compatibility chart in Acrobat format: Click
here
Also
Available:
• OtterBox Armor Expandable
1900 PDA Case for smaller form-factor PDAs (and for Garmin iQue
series when used with a large POD lid to accommodate the extended
antenna). |
• OtterBox Armor Expandable
1900 PDA Case. OtterBox 2600 budget
PDA cases too! |
|
|
MODEL |
STATUS |
MFG PART NO |
OUR
PRICE |
BUY
NOW! |
|
OtterBox
Armor 3600 PDA Case Yellow |
|
3600-05-K1 |
|
|
|
OtterBox
Armor 3600 PDA Case Black |
|
3600-20-K1 |
|
|
|
ACCESSORIES |
 |
OtterBox
3600 Deep Box Kit Yellow
This kit adds .5" (12.7mm) to the depth of the 3600
series case. This allows the case to be expanded for accessories
such as dual expansion packs, extra battery storage, and deep model
GPS Units. Also has six mounting bosses for custom applications
such as circuit boards and added battery mounting.
Internal: L6.75" - W3.6" - D1.65" (L171.5mm - W91.5mm
- 42mm) External: L8.5" - W1.37" min (W5.25" max)
- D3.0" (L216mm - W111mm min (W 133mm max) - D76mm) |
|
KIT002 |
|
|
 |
OtterBox
3600 Screen Saver Kit
Includes 3 new screens, Silicon gaskets for the
box, Buna gasket for the screen, and a model specific foam insert.
This kit can also be used to convert to a different model of PDA. |
|
3611 |
|
|
 |
OtterBox
3600 Wire Connectivity Kit
Through the box connectivity kit allow for multiple
sizes of cables, power, sync, GPS, printers, etc. to pass through
the case and connect to your PDA. The kit attaches easily to the
case and works with all PDA models.
Note: This kit is rated as water-resistant, not water proof.
The case is not submersible with this kit attached. |
|
KIT009 |
|
|
|
OtterBox 3600 Serial POD
Allows for the use of Null modem serial devices with your newer model Ipaqs in the Armor 3600 case. A 4mm power jack is so incorporated into the POD so that the unit may be charged while still in the case. The connections are fully protected from the environment and impact. If you are interested in using the serial connection to sync the Ipaq, a Null modem adapter is required.
|
|
UK-KIT27 |
|
|
|
OtterBox 3600 Rubber Plug Access Kit
Allows you to sync and charge your PDA unit without removing it from the case by replacing the standard end plugs with these "easy access" plugs. These easy-to-use plugs are easily opened from the outside, and they allow quick access to the SD and CF slots on top of your device. Made out of elastomeric material for longer life, this kit includes plugs for both the top and bottom of the case, and is extremely easy to install and use. Note: Plugs are not watertight but are highly water-resistant
|
|
KIT032 |
|
|
|
|
Bridge
Mount Kit
For adding RAM B-size
mounts
RAM-B-238 can be used for attachment.
Includes 4mm threaded insert for custom applications
|
|
KIT012 |
|
|
Mount
Examples: Visit our RAM accessories
page to order RAM components and assemblies |
|
|
|
|
|
|
With:
RAM-B-238
diamond
RAM-201 3" arm
RAP-224-1 twist lock suction base |
With:
RAM-B-238 diamond
RAM-201 3" arm
RAM-B-121B yoke clamp |
With:
RAM-B-238
diamond
RAM-201 3" arm
RAM-B-238 diamond |
With:
RAM-B-149Z Ubolt assembly |
|
© 2001-2010
Mach Ten Enterprises Inc.
All rights reserved |
|
|
|
|
