| |
Touratech Mounts
for GPS II/III/V
The
Ultimate Mount for Dual-Sport, Dirt BIke, ATV, Snowmobile or Touring Motorcycle! |
|
|
Touratech's
exceptionally robust aluminium mounting cradles are made in Germany, especially
designed for motorcycle/off-road use and will protect the electronics of your
GPS and hold it securely under harsh riding conditons. Touratech mounts are vibration
isolated and include antenna support and damping for models with a removable antenna. For
touring motorcycles where vibration may not be a serious concern, consider the
advantages of the high-tech good looks and practicality of Touratech mounts to
enhance the appearance and value of your motorcycle as well as to secure your
GPS.
Recommendation:
For dual sport use, dirt bikes, race bikes, or any other high vibration/high
RPM use, it is recommended that the motorcycle's 12 volt system
is used to power the GPS to avoid battery shutdown under vibration,
UNLESS a MvG super-vibration isolated mount is used. Many Touratech
mounts positively accept and retain the 12
volt adapter cable. |
| |
*
To order Touratech mounts from the US we recommend you visit CycoActive;,
outside the Americas visit Touratech
AG
For mounting solutions for GPS models not featured here, consider a
secure RAM mounting system |
| MODEL |
STATUS |
MFG
PART NO |
OUR
PRICE |
BUY
NOW! |
|
|
Touratech
Super MvG
GPS II/III/V Mount |
|
065-0035 |
|
|
|
RAM
MOUNTING ATTACHMENTS |
Touratech
cradles can be mounted directly on the crossbar of off-road bikes,
fairing brace or anywhere you have a 1/2" bar. For other installations,
Touratech cradles can also be mounted using a variety of RAM
components that can be attached to the flat baseplate of the
cradle. Visit
CycoActive for installation details. The assemblies
below are popular choices. |
|
|
RAM
diamond attachment, 3" arm,
2 1/2" dash mount base |
|
RAM-B-138 |
|
|
|
|
RAM
diamond attachment, 3" arm,
zinc coated 1" U bolt |
|
RAM-B-149Z |
|
|
|
RAM
diamond attachment, 3" arm,
stainless steel 1" U bolt |
|
RAM-B-149 |
|
|
 |
RAM
Locking Knob
Use to replace the wing nut on RAM 1" ball arms for security
(e.g. when used with Touratech locking mounts) |
|
RAM-KNOB3L |
|
|
 |
Locking
Mount User Tip: A RAM mounted Touratech Locking Mount can be
made tamper-resistant by replacing the RAM arm easy adjust thumbscrew
with this Allen
key adjust security screw. Click
here for details (Allen key not included) |
|
T-GCSEC |
|
|
 |
10mm Spacer (Bolt not included). The 10mm spacer drops into the counterbore and is used with a bolt. |
|
T-GCMXB (Spacer) |
|
|
TOURATECH
POWER KITS |
 |
Motorcycle 12v Hardwire Power Kit: This Touratech GC12V motorcycle hardwire power kit contains everything you need to connect your Garmin GPS unit to your motorcycle and protect your connections from vibration: a 12V GPS power cord (5.5 ft long), battery terminal connectors, a blade-type fuse kit with two 2-Amp fuses, a cap for the plug, and a small container of dielectric grease |
T-GCSEC |
|
© 2001-2010
Mach Ten Enterprises Inc.
All rights reserved |
|
|
|
