GARMIN GPS 35 Series Discontinued

The GARMIN GPS 35 series products are complete GPS sensors, complete with integrated antenna. They are designed for a broad spectrum of OEM (Original Equipment Manufacturers) system applications. The GPS 35 will track up to twelve satellites at a time while providing fast time-to-first-fix, one-second navigation updates, low power consumption, and excellent EMI/RFI performance for easy integration into wireless communication systems.

The GPS 35 TracPak is housed in a black, water-resistant case and designed to withstand rugged operating conditions. While the GPS 35 TracPak is designed as a "plug 'n play" GPS solution, the minimum system must provide a source of power and a clear view of the GPS satellites.

• 12 parallel channels, differential ready -- accepts RTCM SC-104 inputs
• Built-in non-volatile memory for sensor configuration parameters
• Internal rechargeable lithium battery for RAM backup of almanac and ephemeris data
• Low power consumption
• Industry standard NMEA 0183 data available at user selectable baud rates for position, velocity, time, receiver status, satellite geometry, signal strength and error estimates.
• Raw phase and pesudorange measurement data available for use in survey quality instrumentation.
• 1 microsecond accuracy timing pulse

GPS35-LVC Attached 10 foot power/data cable with bare wire ends. Accepts power from unregulated low voltage power supplies between 3.6 and 6 VDC. Asynchronous serial data interfaces via 2 serial ports with CMOS voltage level outputs, RS-232 polarity.*

GPS35-LVS Attached 10 foot power/data cable with bare wire ends. Accepts power from unregulated low voltage power supplies between 3.6 and 6 VDC. Asynchronous serial data interfaces via 2 serial ports with true RS-232 voltage level outputs.*

GPS35-HVS Attached 5 meter power/data cable with bare wire ends. Accepts power from unregulated high voltage power supplies between 6 and 40 VDC. Asynchronous serial data interfaces via 2 serial ports with true RS-232 voltage level outputs.*

GPS35PC Attached 10 foot power/data cable with female DB-9 serial connection, ready to attach to your PC. Additional 8 foot power cable extension from the DB-9 connector terminates in a cigarette lighter plug for easy application of power supply voltage between 6 and 40 VDC. Asynchronous serial data interface via a single serial port with true RS-232 voltage level output.* **

*All serial inputs on all versions are compatible with either true RS-232 or TTL/CMOS voltage levels. Port 1 uses NMEA 0183 data format. Port 2 transmits binary position and raw measurement data and receives RTCM SC-104 differential corrections data, message types 1, 2, 3, and 9.
**GPS35PC does not implement Port 2.
*** Minimum System Requirements: IBM compatible PC with Pentium class processor, CD-ROM drive, mouse or other pointing device, Windows 98/ME or Windows 2000 operating system, available Universal Serial Bus port (USB), Type A (downstream).