1. Turn unit on
2. Press ENTER two or three times to get to the Satellite Page
3. Press MENU twice to get to the Main Menu
4. Use rocker switch to move highlighted field down to Tracks
5. Press ENTER
6. Use rocker switch to move across to Clear
7. Press ENTER
8. Use rocker switch to move to Yes (Do you really want to clear the track log?)
9. Press ENTER
10. Move around the area of which you wish to measure the area
11. When you have finished, use the rocker switch to move across to Save on the Tracks page
12. Press ENTER
13. Use the rocker switch to move down to Entire Log
14. Press ENTER
15. The area will be shown in Acres. If you wish to change the area units (sq ft, sq yd, sq m, ac, ha, sq km, sq mi, sq nm are options), use the rocker switch to move up to "ac", press ENTER, then use the rocker switch to move to the units you require, and press ENTER to select.
16. Use the rocker switch to move to OK to save the track
17. To view the area of a saved track, use the rocker switch to move to the track you wish to select and press ENTER.