GPSCentral.ca
100% Canadian Owned and Operated! 100% Canadian. Canada's #1 GPS & More Store!
We take Visa, Mastercard, PayPal
Sign in | View cart | Contact us
1-800-585-9331
Prices are in CDN dollars GPS Prices in Canadian Dollars
social follow buttons

 

follow us on facebook follow us on twitter follow us on google plus
 

new!SDRplay RSP2 & RSP2pro
Radio Spectrum Processor

The RSP2 is a powerful wideband full-featured SDR which covers all frequencies from 1 kHz up to 2 GHz. This enhanced version of the popular RSP1 provides three software selectable antenna inputs, & new stability and clocking features ideally suited to industrial, scientific & educational applications. Combined with the power of SDRuno receiver software this versatile receiver can monitor up to 10 MHz of spectrum at a time. The RSP2 is housed in an RF shielded robust plastic case.

Key Features

 
RSP2
RSP2pro
Continuous coverage from 10 kHz to 2 GHz
Continuous coverage from 1 kHz to 2 GHz
Up to 10 MHz visible bandwidth
Powers over the USB cable with a simple type B socket
12-bit ADC silicon technology (not another 8 bit dongle!)
8 built in front-end pre-selection filters
10 high-selectivity, built in front-end preselection filters
Software selectable (On/Off) Low Noise Preamplifier
Software selectable multi-level Low Noise Preamplifier
SDRuno—World Class SDR software
Open API for new apps development
Single SMA antenna socket
2 x SMA Software Selectable Antenna Inputs
1 x High Impedance Input for long wire antennas
Software selectable MW /FM notch filters
Highly stable 0.5PPM TCXO trimmable to 0.01PPM
24MHz Reference clock input / output connections
4.7V Bias-T (Port B only)
Robust and strong plastic case
 
RF shielding layer inside case
 
Rugged metal case
   

Key Benefits

• Low power consumption, Ideal for portable operation
• Covers all frequencies from experimental LF through to L-Band
• Supports simultaneous HF and VHF antenna combinations
• Includes world class SDRUno SDR software (Windows)
• Support for other popular SDR packages (including HDSDR, SDR Console, Cubic SDR and GNU Radio) will follow
• Ability to synchronise multiple RSPs
• Software upgradeable for future standards
• Strong and growing software support network
• API provided for demodulator or application development
• Multiplatform support including Linux, Mac, Android and Raspberry Pi 2/3 will follow
• Up to 16 individual receive channels in any 10MHz slice of spectrum using SDRuno
• Calibrated S meter and power measurements with SDRuno

SDRuno Features
• Multiple virtual receiver support
• Class leading audio quality
• Calibrated S meter and power measurements
• RDS support with “DX Mode” for low signal environment
• Active Noise cancelling
• RF Notch Filtering
• CAT and Omnirig control
• SSB/AM and Synchronous AM modes
• WBFM and NFM with AFC

Specifications

General
• RSP2 Weight: 112g
• RSP2 Size: 98mm x 86mm x 32mm
• Low current: 170mA typical (excl Bias T)

Connectivity
USB
• USB 2.0 (high speed) type B socket Port
A Characteristics
• 1.5 MHz – 2 GHz operation
• 40 dB RF gain control
• 50 Ω input impedance
• SMA Female connector
Port B Characteristics
• 1.5 MHz – 2 GHz operation
• 40 dB RF gain control
• 50 Ω input impedance
• SMA Female connector
• Selectable 4.7V DC out (see Bias T)
High Z port Characteristics
• 1 kHz – 30 MHz operation
• 18 dB RF gain control
• 1kΩ input impedance (balanced)
• Pluggable screw connector (CTB9208/3 plug supplied)
Reference clock I/O
• MCX Female connector

IF Modes
• Zero IF, All IF bandwidths
• Low IF, IF bandwidths ≤ 1.536MHz

IF Bandwidths
• 200kHz, 300kHz, 600kHz, 1.536MHz
• 5.0 MHz, 6.0 MHz, 7.0 MHz, 8.0 MHz

Bias T
• Software selectable 4.7V @ 100mA output voltage on Port B.

Reference
• High Stability 0.5PPM TCXO
• In-field trimmable to 0.01ppm.
• 24MHz Reference in/out connections

ADC Characteristics
• Sample frequency up to 10.66MSPS
• 12 bit native ADC
• 10.4 ENOB
• 60dB SNR
• 67dB SFDR

NF (max RF gain)
• 8dB @ 3MHz
• 2.0dB @ 10MHz
• 1.6dB @ 20MHz
• 1.5dB @ 40MHz
• 1.5dB @ 100MHz
• 1.9dB @ 200MHz
• 5.0dB @ 360MHz
• 2.5dB @ 600MHz
• 3.5dB @ 1300MHz
• 4.0dB @ 1800MHz

IIP3 (min LNA gain)
• +15dBm @ 3MHz

Front End Filtering (Ports A and B) (automatically configured)

Low Pass
• 12MHz

Band Pass
• 12 – 30MHz
• 30 – 60MHz
• 60 – 120MHz
• 120 – 250MHz
• 250 – 300MHz
• 300 – 380MHz
• 380 – 420MHz
• 420 – 1000MHz

High Pass
• 1000MHz

Notch Filters
• FM Filter >60dB 80 – 100MHz
• MW Filter >30dB 680 – 1550 kHz

Front End Filtering (High Z port)

Low Pass
• 30MHz

DO NOT directly connect an RSP to the same antenna as your transmitter, or to an antenna in the near field of a transmitting antenna, as this is likely to result in irreversible damage to your RSP and invalidate your warranty.

sdrplay rsp2
RSP2

sdrplay

 

NOTE: DO NOT directly connect an RSP to the same antenna as your transmitter, or to an antenna in the near field of a transmitting antenna, as this is likely to result in irreversible damage to your RSP and invalidate your warranty.

rsp2 pro
RSP2pro

 

MODEL
STATUS
MFG PART NO
OUR PRICE
BUY NOW!

SDRplay RSP2 Radio Spectrum Processor

RSP2

SDRplay RSP2pro (metal box) Radio Spectrum Processor

RSP2pro


© 2001-2017
GPS Central
#8, 711 48th Ave SE Calgary AB Canada T2G 4X2
Since 2001 - Factory Authorized Dealer

Sitemap | Terms of Use | Privacy Policy