DG-100 Data Logger USB GPS Receiver

The GlobalSat DG-100 GPS data logger records travel data by using GPS signals.  It is completely self-contained with batteries, a built-in antenna (there's also an external antenna port if you need it), and enough internal memory to log up to 50,000 waypoints.  The DG100 records time, date, speed, altitude and GPS location at your preset intervals, which you can configure with the included utility software. Designed using the SiRF Star III chipset, the DG100 will provide accurate positioning and tracking for your application.

Recorded GPS data is then downloaded to your computer through its USB port. With the included software utility (for WIN O/S/ only), a user can easily export their recorded information in a variety of file formats such as .CSV, TXT and .KML, for use on Google Earth and Google Maps.

Use the DG-100 in fleet management, marine navigational aids, traveling and recreational use. 

Features
• SiRF StarIII chipset 20 channels
• Store up to 50,000 waypoints
• Two (2) NiMh batteries for more than 20 hours continuous operation.
• USB interface (includes WIN driver)
• Power On/Off button for easy use
• Three preset record intervals (Time/Distance) selectable with slide switch
• Three LED's to show the status of GPS battery and memory
• MMCX port for optional external GPS antenna
• USB GPS receiver function for laptops
• Configuration Wizard helps with easy record interval configuration
• Metric or Imperial measurements
• Windows based software utility to
- Upload recorded data
- Change Recording Intervals (as low as 1 sec. or 1 foot and higher)
- Configuration Settings
- Delete Recorded Data
Exporting Recorded Data:
(1) Export and interface with Google Earth (.kml)
(2) Show recorded data on Google Maps
(3) Text format (.txt)
(4) Excel file format (.csv)
(5) NMEA183

System Specifications

GENERAL
GPS standard	SiRF StarIII
GPS Antenna	Built-in patch antenna
Operation time	Up to 24 hrs
Charge time	7 hrs
Battery Charging	USB connector @ 350mah
POWER BUTTON
Power On/Off		Press and hold for 3 second to On/Off the device.
Instant Save		Press button once to save a waypoint manually when device is active.
STATUS LED’S
GPS status	Flashing Green = GPS position is fixed Steady Green = GPS position is not fixed
Power status	Solid Red = Device power ON Flashing Red = Device has low battery power Solid Amber = Battery is charging
Memory status	Flashing Blue = Memory is 2/3 full Solid Blue = Memory is full
TEMPERATURE
Operating	-20°C ~ 50°C   (-4°F ~ 122°F)
Storage	-20°C ~ 35°C   (-4°F~ 95°F)
Humidity	Operational up to 95% non-condensing
SLIDE SWITCH
One Slide Switch	There are three customized setting of intervals: A (interval 1 Time or Distance selectable) B (interval 2 Time or Distance selectable) C (interval 3 Time or Distance selectable)
DATA CAPACITY
Waypoints	50,000 stored (stop record / overwrite data selectable)
BATTERY
Battery Type	(2) NiMh Rechargeable Batteries
MECHANICAL
Dimension	3.15” 2.75” x’ 0.7’’

GPS Specifications

Electrical Characteristics
GPS Chipset			SiRF Star III
Frequency			L1, 1575.42 MHz
C/A Code			1.023 MHz chip rate
Channels			20 channel all-in-view tracking
ACCURACY
Position Horizontal			10 meters, 2D RMS 1-5 meters 2D RMS, WAAS corrected
Velocity			0.1m/sec
Time			1 micro-second synchronized to GPS time
DATUM
Datum			Default: WGS-84
ACQUISITION RATE
Hot start			1 sec., average
	Warm start	38 sec., average
	Cold start	42 sec., average
	Reacquisition	0.1 sec. average
	PROTOCOL
	GPS Protocol	Default: NMEA 0183      (Secondary: SiRF binary)
	GPS Output format	GGA(1sec), GSA(1sec), GSV(5sec), RMC(1sec), GLL, VTG is optional
	DYNAMIC CONDITION
	Acceleration Limit	Less than 4g
	Altitude Limit	18,000 meters (60,000 feet) max.
	Velocity Limit	515 meters/sec. (1,000 knots) max.
	Jerk Limit	20 m/sec**3