IMAGE |
PART NO |
DESCRIPTION |
STATUS |
OUR PRICE |
ORDER NOW! |
1)
Choose a base. If you change vehicles, just buy a new base! |
Pivot
Lock System: Create a base that can be set at any angle between
horizontal and vertical to the mount |
 |
RAM-VB-REM1 |
DISCONNECT
ADAPTER, FOR RAM VEHICLE LAPTOP
TELE-POLE SYSTEMS
This component allows any RAM Vehicle Laptop Tele-Pole
System to be easily removed: pull the spring loaded locking safety
pin and the entire Tele-Pole with Laptop System is easily removed
from the vehicle base. What is left is a small discrete vehicle
base, with Quick Release Male Spud. Retro-fit it to any new or existing
system in minutes. Enjoy the convenience of completely removing
your RAM Laptop Mount, leaving the maximum amount of room for passengers
and or other items that require cargo space. |
|
|
|
 |
RAM-VB-REM1M |
RAM Remove-A-Pole™ Male Base |
|
|
|
 |
|
RAM Adjust-A-Pole™ Base for Vehicle Laptop Mounts
The RAM Adjust-A-Pole™ allows the installer to perfectly position a Tele-Pole™ assembly around any obstruction. The dual pivot point design allows for infinite adjustability - forward, back, left, right, up, down. |
|
|
|
 |
|
RAM
Aluminum Male Pivot Lock with Male Post for RAM-290 pedestal. Works
with RAM-282 to create an adjustable base for RAM-290 telescoping
pedestal |
|
|
|
 |
|
RAM
Aluminum 5'' square Base Plate with Female Pivot Lock. Works with
RAM-281 or RAM-284. Mounting
hardware is not included.
|
|
|
|
 |
RAM-284 |
RAM
Aluminum 1/2'' Female Pipe Clamp with Male Pivot Lock. Use with
RAM-282 and RAM-PA54xx
pipe.
|
|
|
|
Square
90 degree base plate |
 |
RAM-283 |
RAM
Aluminum 5'' square Base Plate with 90 deg. Male Post for RAM-290
Pedestal. Mounting hardware is not included. |
|
|
|
2)
Add a pedestal |
Adjustable
height: Use with RAM-281/282 or RAM-283 base |
 |
RAM-290 |
RAM
Aluminum Pedestal Arm with 18'' Pipe.
This fits on top of the RAM-281 or RAM-283 base post. The height
of the pipe can be adjusted to suit. |
|
|
|
Fixed
height pipe: Use with RAM-284 base and RAM-218-1 ball. |

|
RAM-PA8206 |
RAM
6'' Pipe with 1/4'' NPT Thread Ends. |
|
|
|
RAM-PA8209 |
RAM
9' Pipe with 1/4'' NPT Thread Ends. |
|
|
|
RAM-PA8212 |
RAM
12'' Pipe with 1/4'' NPT Thread Ends. |
|
|
|
RAM-PA8218 |
RAM
18'' Pipe with 1/4'' NPT Thread Ends. |
|
|
|
RAM-PA8224 |
RAM
24'' Pipe with 1/4'' NPT Thread Ends. |
|
|
|
2)
Choose an arm system |
Swing
arm options: The swing arm socket fits directly on top of the RAM-290
pipe |
 |
RAM-261 |
RAM
Aluminum Single 6'' Swing Arm with Single 1.5'' Socket. Can connect
directly to a top plate or use RAM-230 to add a socket arm extension. |
|
|
|
 |
RAM-261-2 |
RAM
Aluminum Single 6'' Swing Arm with Double 1.5'' Ball. Add RAM-201 or RAM-201-B arms |
|
|
|
 |
RAM-261-1 |
RAM
Aluminum Single 6'' Swing Arm Extension with Pipe Connection. Use
to extend RAM-261 or RAM-261-2. |
|
|
|
 |
RAM-109-1ATU |
RAM
Mount straight swing arm extension with 4" bolt |
|
|
|
 |
|
RAM
Non-slip bearing kit for Swing Arms |
|
|
|
Socket
arm options: Add a RAM-218-1 ball to the top of the pipe and the
socket arm of your choice |
 |
|
RAM
Aluminum 1.5'' Ball with female 1/2'' NPT Thread. Screws to the
top of RAM-290 pipe. |
|
|
|
 |
|
RAM
Aluminum 1.5'' Ball 4.63'' Double Socket Standard Size Arm. Can
be used with RAM-261-2 also. |
|
|
|
 |
RAM-201-B |
RAM
Aluminum 1.5'' Ball 2.25'' Double Socket Short B Size Arm. Can be
used with RAM-261-2 also. |
|
|
|
 |
RAM-230 |
RAM
Aluminum 1.5'' Double Ball Connector. Connect two socket arms together |
|
|
|
3)
Choose a top plate for attachment to laptop tray or other electronics |
 |
|
RAM
Aluminum 1.5'' Ball 2.5'' dia Base. |
|
|
|
 |
|
RAM 2.5" Round Base with 3/8"-16 Female Threaded Hole & 1.5" Ball |
|
|
|
 |
|
RAM 2.5" Round Base AMPs Hole Pattern, Steel Reinforced Post & C Size 1.5" Ball |
|
|
|
 |
|
RAM 2.5" Stainless Steel Round Base with the AMPs Hole Pattern & 1.5" Ball |
|
|
|
 |
|
RAM C Size 1.5" Ball on Rectangular Plate with 1" x 2.5"
4-hole pattern of 1" x 2.5" center to center. Overall plate dimensions are 1.5" x 3". |
|
|
|
 |
|
RAM C Size 1.5" Ball on Rectangular Plate with 1.5" x 2.5" 4-hole pattern of 1.5" x 2.5" center to center. Overall plate dimensions are 2 " x 3". |
|
|
|
 |
|
RAM C Size 1.5" Ball on Rectangular Plate with 1.5" x 3.5" 4-hole pattern of 1.5" x 3.5" center to center. Overall plate dimensions are 2" x 4 ". |
|
|
|
 |
|
RAM
Aluminum 1.5'' Ball Universal 6.25'' x 2'' Plate. This plate is
designed to hold many electronic units. |
|
|
|
 |
RAM-246 |
4.75''
square VESA plate with 100mm + 75mm holes, with 1.5" ball |
|
|
|
 |
|
3
5/8" sq 75 mil base with 1.5" ball |
|
|
|