GPSC PN
Availability
Sale Ends
Notify Me
PWRspkr Specifications |
|
|
Dimensions
|
4.3″ H x 5.5″ W x 2.5″ D
|
|
Power Requirements
|
9 to 16VDC
Current: 2A max w/ 13.8V supply |
|
Sensitivity
|
0.83 VRMS produces full output into 4 ohms (1 kHz signal, 13.8V supply)
|
|
Loudspeaker Driver
|
4 in. treated paper cone
4 ohm impedance Rated Power: 20 watts |
|
Power Amplifier – Integrated Circuit
|
Class AB Linear BTL (bridged-tied-load) circuit
15 watts RMS audio output into 4 ohms when powered by 13.8V supply Short circuit protected by shut down Over-heat protected by shut down Heat sink is the two PCB ground planes |
|
Pre-Amplifier
|
Active four stage filter with gain
Frequency response is flat 300 to 3.2kHz 18 dB/octave high-pass at 300 Hz (-3 dB) 18 dB/octave low-pass at 3.2 kHz (-3 dB) |
In the Box:
- PWRspkr – Amplified Speaker
- Tilt mounting bracket
- 6-ft. power cable with Powerpole connectors
- 1/8″ Audio Cables, 6 ft.
- Owner’s Manual