100% Canadian Owned and Operated! 100% Canadian. Canada's #1 GPS & More Store!
We take Visa, Mastercard, PayPal
Sign in | View cart | Contact us
Prices are in CDN dollars GPS Prices in Canadian Dollars
social follow buttons


follow us on facebook follow us on twitter follow us on instagram

saleIcom IC-7300
HF/50MHz Transceiver

Save $100.00 with Icom's mail-in rebate until December 31, 2021!

The Innovative HF Transceiver

New technology is changing the way receivers are being designed and the IC-7300 is an industry first as an RF, Direct Sampling System is being used in an entry level HF radio. The ability to digitize RF before various receiver stages reduces the inherent noise that is generated in the different IF stages of a radio. We feel the performance of the ‘7300 will far exceed your expectations for a radio considered entry level.

Output power: 100W (25W AM)
RX Frequencies:   0.030-74.800
Receiver type:   Direct sampling

RF direct sampling system

The IC-7300 employs an RF direct sampling system, where RF signals are directly convert to digital data. Then processed in the FPGA (Field-Programmable Gate Array), making it possible to simplify the circuit construction as well as reduce noise that can mask weak signals.

The new “IP+” improves the 3rd order intercept point (IP3) performance improving the ability to copy a weak signal that is adjacent to either a strong interfering signal. In this process, A/D converter is optimized to reduce or eliminate signal distortion.

icom ic-7300

RMDR and phase noise characteristics

The IC-7300’s RMDR is about 97dB* (typical value) improving the Phase Noise characteristics by about 15dB (at 1 kHz frequency separation). The superior Phase Noise characteristics reduce noise components for both receive and transmit signals.
* At 1 kHz frequency separation (received frequency: 14.2MHz, MODE: CW, IF BW: 500Hz)

icom ic-7300

15 discrete band-pass filters

The RF Direct Sampling is protected by an array of bandpass filters. The signal passes through one of the fifteen bandpass filters, where signals outside the passband are rejected. To reduce the insertion loss, the IC-7300 utilizes High Q factor coils.

Large color touch screen

The large 4.3” color TFT touch LCD offers intuitive operation of functions, settings, and various operational visual aids such as the band scope, waterfall function, and audio scope.

Like on the high-end rigs, the waterfall shows a change of signal strength over a period of time and allows you to find weak signals that may not be apparent on the spectrum scope.

Use the audio scope function to observe various AF TX/RX characteristics such as microphone compressor level, filter width, notch filter width and keying waveform in the CW mode. Image below shows the Audio scope with the waterfall function and the oscilloscope.

Real-Time spectrum scope

You no longer have to choose whether to listen to the audio or have the spectrum scope sweep for signals as the IC-7300’s real-time spectrum scope offers the simultaneous operations found in some of the more expensive rigs! This means you can use either the spectrum scope or the waterfall to quickly move to an intended signal while listening to the receiver audio. The ‘7300’s touch screen introduces a “Magnify” function. So, when you first touch the scope screen around the intended signal, the touched part is magnified. A second touch of the scope screen changes the operating frequency and allows you to accurately tune.

Spectrum scope specifications

Scope system FFT (Fast Fourier Transform)
Sweep speed Max. 30 frames/second (approx.), selectable from slow, mid or fast
Span width 5kHz–1000kHz
Resolution 1 pixel minimum (approximately)
Waveform display area (vertical axis) 80dB
Reference level adjustment –20dB to +20dB
Peak level hold function (Max. hold) ON/OFF/last 10 seconds
Other functions Averaging indication
Touch screen operation
VBW (Video Band Width) adjustment

Additional Features:

  • Built-in automatic antenna tuner
  • 101 channels (99 regular, 2 scan edges)
  • SD memory card slot for saving data
  • Cooling fan system
  • Multi-function meter
  • CW functions: full break-in, CW reverse, CW auto tuning
  • SSB, CW, RTTY, AM, FM modes

IC-7300 Specifications

Frequency coverage
1.800–1.999, 3.500–3.999, 5.255–5.405*, 7.000–7.300, 10.100–10.150, 14.000–14.350, 18.068–18.168, 21.000–21.450, 24.890–24.990, 28.000–29.700, 50.000–54.000 

* Some frequency bands are not guaranteed.
** Guaranteed range: 0.500–29.999, 50.000–54.000MHz.
Number of channels
101 (99 regular, 2 scan edges)
Antenna connector
SO-239 (50Ω)
Power supply requirement
13.8V DC ±15%
Power Consumption
Tx: 21A (at 100W output power)
Rx: 0.9A typical (Standby), 1.25A (Maximum audio)
Operating temperature range
–10˚C to +60˚C; 14˚F to 140˚F
Frequency stability
Less than ±0.5ppm (–10˚C to +60˚C; 14˚F to 140˚F)
Frequency resolution
240×94×238mm; 9.45×3.7×9.37in(projections not included)
Weight (approximately)
4.2kg; 9.26 lb
2 Years
Output power (HF/50MHz)
SSB/CW/FM/RTTY: 2–100W, AM: 1–25W
Modulation system
Digital P.S.N. modulation
Digital Low power modulation
Digital Reactance modulation
Spurious emission
Less than –50dB (HF bands), Less than –63dB (50MHz band)
Carrier suppression
More than 50dB
Unwanted sideband
More than 50dB
Microphone impedance
Receiver system
Direct Sampling Superheterodyne
Intermediate frequency
SSB/CW (at 10dB S/N)
  50MHz band
AM (at 10dB S/N)
  50MHz band
FM (at 12dB SINAD)
  50MHz band



* HF: Preamp 1 ON, 50MHz: Preamp 2 ON
Squelch sensitivity* (Threshold)
SSB: Less than 5.6μV, FM:
Less than 0.3μV
* HF: Preamp 1 ON, 50MHz: Preamp 2 ON
Selectivity (sharp filter shape)
SSB (BW: 2.4KHz)
CW (BW: 500Hz)
RTTY (BW: 500Hz)
AM (BW: 6kHz)
FM (BW: 15kHz)
More than 2.4kHz/–6dB
Less than 3.4kHz/–40dB
More than 500Hz/–6dB
Less than 700Hz/–40dB
More than 500Hz/–6dB
Less than 800Hz/–40dB
More than 6.0kHz/–6dB
Less than 10kHz/–40dB
More than 12.0kHz/–6dB
Less than 22kHz/–40dB
Spurious and image rejection ratio
HF: More than 70dB
50MHz: More than 70dB (Except for ADC Aliasing)
Audio output power
More than 2.5W (at 10% distortion with an 8Ω load, 1kHz)
Frequency range
1.9–50MHz bands
Matching impedance range
16.7Ω–150Ω unbalanced (VSWR better than 1: 3)
Tuning accuracy
VSWR 1: 1.5 or less
Tuning time
2–3 seconds (Maximum 15 seconds)

All stated specifications are subject to change without notice or obligation.

Unit Accessories button
french manual

Until Dec 31, 2021
Reg: $1,799.99

Icom ic-7300

Package Includes:
• IC-7300

Hand microphone
• DC power cable
• Spare fuses

• Plugs



icom ic-7300
IC-7300 Back Panel


IC-7300 Screen Shots

icom ic-7300


icom ic-7300


icom ic-7300


icom ic-7300


icom ic-7300


icom ic-7300



Icom IC-7300 Transceiver


Until Dec 31, 2021
Reg: $1,799.99

© 2001-2021
GPS Central
#8, 711 48th Ave SE Calgary AB Canada T2G 4X2
Since 2001 - Factory Authorized Dealer

Sitemap | Terms of Use | Privacy Policy