100% Canadian Owned and Operated! 100% Canadian. Canada's #1 GPS & More Store!
We take Visa, Mastercard, PayPal
Sign in | View cart | Contact us
Prices are in CDN dollars GPS Prices in Canadian Dollars
social follow buttons


follow us on facebook follow us on twitter follow us on instagram

Icom IC-7410
HF-6m All Mode Transceiver

Discontinued. Browse our selection of other great amateur transceivers >>

Outstanding Receiver Performance!
arrow +30dBm 3rd order intercept point (in 14MHz band)
arrow Double conversion superheterodyne system improves inband IMD characteristics
arrow 32-bit floating point DSP unit
arrow Built-in 15kHz first IF filter and optional 3kHz and 6kHz first IF filters
arrow Large monochrome LCD display
arrow ±0.5ppm frequency stability
arrow Built-in simple band scope
arrow Built-in automatic antenna tuner
arrow All mode (SSB/CW/RTTY/AM/FM)
arrow Optional RS-BA1 for IP remote control

Icom IC-7410 HF/6M Amateur HF Transceiver
The IC-7410 has been designed as an HF/50MHz specialized rig with excellent performance and features in this category. The IC-7410 employs high grade DSP unit and double conversion super-heterodyne system developed from the latest technology used in our higher grade rigs such as the IC-7800/7700/7600 series. In addition, the IC-7410 comes with a built-in 15kHz 1st IF filter and can accept up to two optional filters (3kHz/6kHz). When used with these 1st IF filters, narrow mode signals such as the CW and SSB modes are protected from adjacent strong signals. 

Major Features:

  • +30dBm 3rd order intercept point (in 14MHz band)
  • Double conversion superheterodyne system improves inband IMD characteristics
  • 32-bit floating point DSP unit
  • Built-in 15kHz first IF filter and optional 3kHz and 6kHz first IF filters
  • Large monochrome LCD display
  • ±0.5ppm frequency stability
  • Built-in simple band scope
  • Built-in automatic antenna tuner
  • All mode (SSB/CW/RTTY/AM/FM)
  • Optional RS-BA1 for IP remote control

Faster DSP unit and in-house DSP expertise
The IC-7410 employs a much higher speed DSP unit compared to the IC-746PRO/7400's DSP unit. 
The AD/DA converter AK4620B allows for a high dynamic range and superior S/N ratio.

Icom has many years of DSP expertise, and has been key in development of the technology. 
The IC-7410 represents the latest in digital achievement and performance. 
Double-conversion superheterodyne
The IC-7410 employs a double conversion superheterodyne system which has an image rejection mixer for the 2nd mixer stage. When compared to a typical triple-conversion system, signal distortion is dramactically reduced. 

+30dBm third-order intercept point (IP3)
Icom's analog RF circuit experience combined with the latest DSP software technology results in +30dBm IP3 equivalent to the IC-7600. Even in tough RF conditions, such as interference by broadcast stations or strong neighboring ham stations, a weak signal can be clearly received by the IC-7410. 

Three first IF filters (3/6/15kHz)*
The IC-7410 comes with a built-in 15kHz 1st IF filter and can accept up to two optional filters (3kHz FL-431 and 6kHz FL-430). By changing the first if filterIF filter width according to the operating mode, the desired signal is protected from the influence of nearby strong stations. The 3kHz first IF filter is especially effective in the CW and SSB modes. (Fixed for 15kHz in FM mode.)
* in 14MHz 

High frequency stability
A high stability TCXO crystal oscillator provides ±0.5ppm of high frequency stability over a wide temperature range (0°C to +50°C). This allows for a long stable operating time in modes such as RTTY.

Large, multi-function LCD
The display increases in width from the IC-746PRO/7400. The large multi-function LCD shows frequency, 9-character channel name, channel number, multi functional meter (includes S-meter, RF output, SWR and ALC level). The dot-matrix portion of the LCD shows the following items:

  • Channel name
  • Band scope
  • Memory keyer contents
  • Function key assignment
  • RTTY decoder screen
  • Graphical SWR scale

Simple band scope
The built-in simple band scope shows the band condition at a glance and is handy for searching for active stations. 

RTTY demodulator and decoder
The built-in RTTY demodulator and decoder allows you to instantly read an RTTY message on the display. No external units or PC required. The built-in tuning indicator visually helps in critical tuning. 

Ample CW functions
All of the following CW capabilities are included in the IC-7410

  • Large CW PITCH knob and independent BK-IN (break-in) delay knob improve operating efficiency
  • CW wave form controlled by the DSP
  • 4 keyer channels with 70 characters of transmit memory per channel
  • Multi-function electronic keyer with adjustable keying speed from 6-48 wpm, dot-dash ratio from 1:1:2.8 to 1:1:4.5 and paddle polarity
  • Bug keyer and full break-in function
  • Continuously adjustable CW pitch control from 300-900Hz
  • Double key jacks (front and rear panels)
  • CW reverse

Built-in antenna tuner
The internal antenna tuner covers from 1.8MHz to 54MHz and automatically tunes for low SWR. Variable capacitors provide higher accuracy than a typical mechanical relay tuner. Once you transmit on a frequency, the tuner can instantly retune the frequency using its built-in memory.

USB connector for PC control
The IC-7410 has a standard type B USB connector and can be connected to a PC. Modulation input, audio output, RTTY demodulator output and CI-V command can be controlled via the USB cable. Also, the conventional CI-V remote control jack is built-in to the IC-7410.

Large heat sink
When compared to the IC-746PRO/7400, the IC-7410's large heat sink improves heat dissipation. Even during long hours of heavy-duty cycle operation, the IC-7410 provides stable output power.  

Optional RS-BA1 IP remote control software
The optional RS-BA1 allows you to use the IC-7410 from another room using your home network or even from a remote location over the Internet. Most settings such as filter width, AGC constant, etc., can be controlled from your PC.

Other outstanding features

  • Built-in voice synthesizer announces operating frequency, mode and S-meter level
  • User programmable band edge beep (can be disabled)
  • VSC (Voice Squelch Control) function
  • RF speech compressor
  • Microphone equalizer and adjustable transmit bandwidth
  • Two preamplifier types: Preamp 1: Increases low level signal improving intermodulation characteristics, Preamp 2: High gain preamplifier
  • 20dB built-in attenuator
  • Audio equalizer function
  • CTCSS and DTCS tone encoder and decoder
  • Triple band stacking register
  • Quick split function and frequency lock function
  • RIT and ΔTx variable up to ±9.999kHz
  • SSB/CW synchronous tuning automatically shifts the carrier point when switching between CW and LSB/USB modes
  • 1Hz pitch tuning steps
  • Program scan, memory scan, select memory scan, mode select scan and Δf scan AH-4 control circuit
  • Large independent MIC/RF power and Notch knobs
Rear panel 

  1. Tuner Socket
  2. DC Power Socket
  3. Ground Terminal
  4. Antenna Connectors
  5. Key Jack
  6. ALC Input Jack
  7. Send Control Jack
  8. Accessory Socket
  9. CI-V Remote Control Jack
  10. USB Connector
  11. External Speaker Jack

Icom IC-7410 back panel

Icom IC-7410 Specifications:
Frequency Coverage*1
1.800–1.999MHz 3.500– 3.999MHz
5.255–5.405MHz* 7.000– 7.300MHz
10.100–10.150MHz 14.000–14.350MHz
18.068–18.168MHz 21.000–21.450MHz
24.890–24.990MHz 28.000–29.700MHz
* Some frequency bands are not guaranteed.
Number of channels
101 (99 regular, 2 scan edges)
Frequency stability
Less than ±0.5ppm (0˚C to 50˚C; +32˚F to +122˚F)
Power supply requirement
13.8V DC ±15% (negative ground)
Current drain (at 13.8 V DC):
TX (Max. power): 23A
RX (Max. audio/standby): 3.0A/2.2A
Operating temperature range
0˚C to +50˚C; +32˚F to +122˚F
Antenna connector SO-239×2 (50Ω)
Dimensions (W×H×D;
Projections not included)
315×116×343 mm; 12.4×4.57×13.5 in
Weight (approx.)
10.2kg; 22.4lb
Output power
SSB, CW, RTTY, FM: 2–100 W
AM: 2–27W
Modulation system SSB : Digital PSN modulation
AM : Digital low power modulation
FM: Digital phase modulation
Spurious emissions
Less than –50dB (HF bands)
Less than –63dB (50MHz band)
Unwanted sideband More than 55dB
Carrier suppression
More than 40dB
Microphone connector 8-pin connector (600Ω)
Intermediate frequencies 1st 64.455MHz
2nd 36kHz
Receiver system
Double-conversion superheterodyne
Sensitivity (typical)
10dB S/N for SSB, CW, RTTY and AM, 12dB SINAD for FM
*1Pre-amp 1 ON, *2Pre-amp 2 ON, *328–29.7MHz
Squelch sensitivity (Pre-amp : ON)
SSB: Less than 5.6μV
FM: Less than 0.3μV
More than
Less than
SSB (BW : 2.4kHz, sharp)
2.4kHz / –6dB
3.4kHz / –40dB
CW (BW : 500Hz, sharp)
500Hz / –6dB
700Hz / –40dB
RTTY (BW : 350Hz, sharp
500Hz / –6dB
800Hz / –40dB
AM (BW : 6kHz)
6.0kHz / –6dB
10.0kHz / –40dB
FM (BW : 15kHz)
12.0kHz / –6dB
22.0kHz / –40dB
Spurious and image rejection
More than 70dB
Audio output power (at 13.8 V DC)
More than 2.0 Wat 10% distortion with an 8 Ω load
RIT variable range
PHONES connector
3-conductor 6.35 (d) mm (1/4”)
EXT SP connector
2-conductor 3.5 (d) mm (1/8”)/8Ω
Antenna Tuner
Matching impedance range:
HF bands: 16.7–150Ω unbalanced (Less than VSWR 1:3)
50MHz band: 20–125Ω unbalanced (Less than VSWR 1:2.5)
Minimum operating power
HF bands: 8W
50MHz band: 15W
Tuning accuracy
VSWR 1:1.5 or less (SWR after the motor has stopped)
Insertion loss (after tuning)
1.8 MHz band: 1.2dB or less
3.5 –50MHz bands: 1.0dB or less
Unit Accessories button

Icom IC-7410

Package Includes:
• IC-7410

Hand microphone
• DC power cable

CW key plug
• Spare fuses




Icom IC-7410 HF/50MHz All Mode Transceiver


© 2001-2019
GPS Central
#8, 711 48th Ave SE Calgary AB Canada T2G 4X2
Since 2001 - Factory Authorized Dealer

Sitemap | Terms of Use | Privacy Policy