PWRcheck
Integrated DC Power Analyzer, Watt Meter and Electricity Monitor
Capabilities
Hardware
- Handles 8 display modes including voltage, current flow in either direction, wattage and amp-hours
- Measures 0V* to 60V (Less than 8V requires USB power to PWRcheck), 40A continuous load
- Accurate to within +/- 10mV, +/- 10mA
- Resolution - 10mV, 10mA
- High side monitoring does not require breaking power supply ground or return path, ideal for vehicle use
- Backlit graphics LCD displays data in digital, analog and bar graph formats
- Monitor back up battery with programmable gas gauge
- Non-volatile memory stores more than 100,000 data points (nearly 2 1/2 months worth of data @ 1 point per minute) without power
- USB computer interface for configuration and data download
- Programmable alarm conditions for overcurrent, over/under voltage, amp-hours
- Uses Powerpole® connectors (see Accessories)
- Dimensions: 0.875" H x 4.5" W x 3" D
* PWRcheck requires a minimum 50mA load to measure voltages below 4.5V.
Software
- Easily program every aspect of PWRcheck operation such as data logging rate, display formats, alarm conditions
- Displays current, voltage, wattage and amp-hours in real time
- Integrated charting software automatically collects and displays data
- Downloads stored data for later analysis
- Exports to Excel
Computer System Requirements
Basic Requirements:
- At least an 800 X 600 graphics card and display monitor
- Windows XP, Vista®: 32 or 64 bit, Windows® 7: 32 or 64 bit, Windows® 8, Windows® 10
- An available USB port
Electrical Specifications |
|
Minimum |
Typical |
Maximum |
Unit |
Input Voltage |
|
|
|
|
Without USB |
8 |
- |
60 |
V |
With USB |
0 |
- |
60 |
V |
Input Current |
|
|
|
|
Without USB |
0.120 |
- |
40 |
A |
With USB |
0.025 |
- |
40 |
A |
Input Current Used by PWRcheck |
|
|
|
|
Without USB |
0.060 |
- |
0.120 |
A |
With USB |
0 |
- |
0 |
A |
|

Package includes:
PWRcheck
PWRcheck software, Version 1.35
Micro USB cable
2 pair Red and Black Powerpole® with 30A contacts
Owner's Manual

|