| IMAGE |
PART
NO |
DESCRIPTION |
STATUS |
OUR
PRICE |
ORDER
NOW! |
|
PDA
& UNIVERSAL HOLDERS |
 |
RAM-HOL-PD1 |
Plastic
Universal PDA Holder for all PDA units except iPAQ.
Spring
loaded clamps expand the mount top-to-bottom to accomodate a variety
of PDA sizes.
Cradle Clamping Dimensions:
Height Range: 4.75" - 6.25"
Width Range: 2.25" - 3.25" |
|
|
|
 |
RAM-HOL-PD2
 |
Plastic
Adjustable Holder for PDA units & the Sony PSP.
Three sets of side clamps
are supplied.
Length sizes for each set of three arms:
Short Length: 1/2"
Medium Length: 7/8"
Long Length: 1 3/16"
Cradle Clamping Dimensions:
Width: 2 7/8" - 3.5"
Thickness: 3/8" - 1 1/8" |
|
|
|
 |
|
RAM universal spring loading clamping cradle for smartphones and cell phones.
The cradle includes a top clamp and side retaining arms that adjust accordingly to the width and height of your device, securing your device in the cradle.
Cradle Clamping Dimensions:
Height Range: 4.75" - 6.25"
Width Range: 2.25" - 3.25" |
|
|
|
|
RAM-HOL-UN1
|
Small
Black Universal Side Clamp Holder
Designed to hold a large amount of different kinds
of cell phones and electronic devices such as the IPOD MINI and
Nano, and small MP3's. Padded locking side clamps are released by
pressing a button and close to the width of your phone or other
electronic device.
Dimensions:
Minimum Width: 1.5"
Maximum Width: 2.5"
Side Clamp Height: 1.56"
Side Clamp Depth: 1.13"
Cradle Height: 3.62" |
|
|
|
|
RAM-HOL-UN2 |
Medium
Universal Small Side Clamp Holder
Padded side clamps are released by pressing a button
and close to the width of your phone or other electronic device
Dimensions:
Minimum Width: 2.22"
Maximum Width: 3.75"
Side Clamp Height: 5.0"
Side Clamp Depth: 1.25" (Maximum)
Cradle Height: 4.0" |
|
|
|
 |
RAM-HOL-UN4 |
Finger
Grip Cradle
Ideally
suited to a variety of outdoor uses (e.g. ATV), this holder is fully
adjustable and perfect for small to medium size devices. No internal springs, gears,
or push buttons to break - just an easy finger clamp manouevre.
This mount is designed to hold the following devices:
Cell Phones (check measurements below for dimensions)
2-Way Radios
GPS Devices
Works with OtterBox (Defender, Commuter, Impact) Cases, Phones with Bumper, Twisted Metal Case and More
Perfect rugged solution for the Blackberry, HTC Evo, Droid X, iPhone, and More
Use on your Motorcycle, ATV, UTV, Car, Boat and More
Height Dimensions:
Minimum
with Top and Bottom Plates: 5.25'' *
Maximum
with Top and Bottom Plates: 6.0'' *
*The
top and bottom plates can be removed for larger devices.
Spine Plate Dimensions: 2.5W x 5.0H''
Using Short Arm Side Clamps
Maximum
Depth: 0.75''
Minimum
Width: 1.25''
Maximum
Width: 3.0''
Using Medium Arm Side Clamps
Maximum
Depth: 1.25''
Minimum
Width: 1.5''
Maximum
Width: 3.5''
Using Long Arm Side Clamps
Maximum
Depth: 1.6''
Minimum
Width: 2.25''
Maximum
Width: 3.5''
|
|
|
|
 |
RAM-HOL-UN5 |
The RAM universal spring loading clamping cradle includes side clamps with rubber bumpers that adjust accordingly to the width of your device, securing your device in the cradle. Primary mounting applications for the clamping cradle is in LOW VIBRATION environments including cars, trucks and fleet vehicles. |
 |
|
Ram X-Grip Spring Loaded Universal Holder & Mounts. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Grip™ has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. Perfect for low profile mounting solutions. |
 |
|
Ram X-Grip Spring Loaded Universal Holder & Mounts. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Grip™ has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. Perfect for heavy duty mounting solutions. |
 |
|
The RAM X-Grip II™ has a clean and clever four leg design that sports great holding power without hiding your tablet behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip II™ is the tablet holder evolved. |
 |
|
The RAM-HOL-UN8BCU consists of a spring loaded cradle and 1.5" rubber ball connected to the back of the base. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The RAM-HOL-UN8BCU expands and contracts for perfect fit of most 7"-8" tablets. |
 |
|
The RAM-HOL-UN9U consists of a composite spring loaded holder, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the holder for quick release of your tablet. The RAM-HOL-UN9U expands and contracts for perfect fit of most 10" tablets with or without sleeves, as well as some smaller tablets. |
 |
|
The X-Grip™ IV has a clean and clever four leg design that sports great holding power without hiding your phone or phablet behind foam pads and plastic. The perfect complement to the modern sleek interior of today's vehicles, the X-Grip™ IV is the phablet holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your phablet and become the most useful accessory in your vehicle. |
|
|
The X-Grip™ IV has a clean and clever four leg design that sports great holding power without hiding your phone or phablet behind foam pads and plastic. The perfect complement to the modern sleek interior of today's vehicles, the X-Grip™ IV is the phablet holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your phablet and become the most useful accessory in your vehicle. |
 |
RAM-HOL-UN11 |
The RAM® X-Grip® universal holder for 12" tablets features an 'X' design that expands and contracts to provide a perfect fit for your device – even if it's in a case. Included are easy access grip knobs located on the back of the cradle for quick release of your tablet. No matter what double socket arm and mounting base you pair the RAM® X-Grip® with, RAM® ball and socket technology allows for near-infinite adjustability to achieve the ideal viewing angle – while also extending the life of your phone by providing shock and vibration damping. |
 |
|
The RAM Quick-Grip Wireless is a patented, universal water resistant wireless charging cradle for phones. As part of the spring-loaded RAM Quick-Grip family, this cradle allows for single-handed placement and removal of your phone while taking advantage of Qi compatible wireless phone charging. |
 |
|
The RAM Quick-Grip Wireless is a patented, universal water resistant wireless charging cradle for phones. As part of the spring-loaded RAM Quick-Grip family, this cradle allows for single-handed placement and removal of your phone while taking advantage of Qi compatible wireless phone charging. Includes Hardwire Charger with Cable. |
 |
RAM-HOL-UN12WB |
The RAM Tough-Charge with X-Grip Technology is the world's first patented, universal waterproof wireless charging cradle for phones. Designed with spring-loaded RAM X-Grip Technology, this cradle features an 'X' design that expands and contracts to secure nearly any phone while taking advantage of Qi compatible wireless phone charging. |
 |
RAM-HOL-UN12WB-V7M |
The RAM Tough-Charge with X-Grip Technology is the world's first patented, universal waterproof wireless charging cradle for phones. Designed with spring-loaded RAM X-Grip Technology, this cradle features an 'X' design that expands and contracts to secure nearly any phone while taking advantage of Qi compatible wireless phone charging. Includes Hardwire Charger with Cable. |
 |
RAM-TETHER
RAM-HOL-UN7T, RAM-HOL-UN8T, RAM-HOL-UN10T, RAM-HOL-UN12WB |
Under extreme environments, you can ensure added piece-of-mind with RAM’s X-Grip Tether. The X-Grip Tether is recommended for out-of-cockpit applications where excessive wind and G-force could cause movement of the device within the holder. It’s also great if you just want a little added stability and vibration control when capturing video from the mount. |
|
RAM-HOL-TAB2 |
Get the most out of your tablet with the RAM Tab-Tite™. With interchangeable cup ends, you can fit the holder to your tablet for a near custom fit. Compatible with Amazon Kindle Fire with or without case, skin or sleeve.
Dimensions:
Height: 6.80" minimum to 9" maximum
Width: Maximum width to 5.31"
Depth: 0.125" minimum to 0.56" maximum |
 |
|
RAM Tab-Tite™ Holder for the Apple iPad & iPad 2. This spring loaded design makes it easy to load and unload your iPad, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your iPad, allowing access to audio jacks, usb, power, and other ports, your iPad can be used just as it was intended. |
|
|
Get the most out of your 10" tablet with the RAM Tab-Tite™ spring loaded, quick release cradle. With interchangeable cup ends, you can fit the cradle to your tablet for a near custom fit. This spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. |
 |
|
The RAM-HOL-TAB11U consists of a spring loaded back plate, custom support cups and Uni-Conn™ docking connector for the iPad Mini with factory lightning connector. The Uni-Conn™ docking connector enables the use of the factory iPad cables with docking connector for charging as well as other functions. |
 |
RAM-HOL-TAB12 |
The RAM-HOL-TAB12U consists of a spring loaded back plate and custom support cups for the iPad mini WITH skin, sleeve or case. The spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, the RAM-HOL-TAB12U is just what you need to get the most out of your tablet. |
 |
RAM-HOL-TAB29 |
The RAM® Tab-Tite™ spring loaded, quick release cradle offers a secure fit with easy access to the mounted tablet. The interchangeable cup ends are designed specifically for the Samsung Galaxy Tab A 8.0, Tab A 8.0 with S Pen Tab S2 8.0 with Otterbox Defender case. The spring loaded design makes it easy to insert and remove your tablet, along with keeping it secure in mobile applications. The custom end cups are designed to optimize the functionality of your tablet, enabling access to all ports and tablet functions. |
 |
|
RAM Universal SMALL Tab-Tite™ for Tablets with or without Cases, Sleeves, Skins - 7" screen tablets. Get the most out of your tablet with the Universal RAM Tab-Tite™ cradle. With 3 sets of interchangeable cup ends, ranging from different sizes and features, you can fit the holder to your tablet for a near custom fit. |
 |
|
RAM Universal LARGE Tab-Tite™ for Tablets with or without Cases, Sleeves, Skins - 10" Screen Tablets. Get the most out of your tablet with the Universal RAM Tab-Tite™ cradle. With 2 sets of interchangeable cup ends, ranging from different sizes and features, you can fit the holder to your tablet for a near custom fit. |
 |
|
Keep your tablet safe with the RAM locking Tab-Lock™ tablet holder. RAM's easy to use locking holder not only looks great and performs flawlessly, but it is compatible with RAM's full line of mounting solutions ideally suited for personal and fleet use. Spring loaded and form fitting, this compact yet durable holder won't take up a lot of space yet provides loads of security. |
 |
RAM-HOL-TABDL7 |
RAM Tab-Lock™ with Uni-Conn™ for the iPad & iPad 2. The RAM iPad locking dock features a unique patent pending design which enables the use of the factory iPad cables with docking connector for charging as well as other functions. With the vast variety of available cable / docking connector accessories for the iPad you can quickly dock your iPad for charging, line out audio, external GPS antenna and much more. Spring loaded and equiped with a keyed lock, this compact yet durable holder won't take up a lot of space yet provides loads of security. |
 |
|
Now RAM offers an affordable Bluetooth keyboard that can be used with any iPad or tablet for efficient and comfortable data entry. Pair this Bluetooth keyboard with the RAM Tablet Keyboard Adapter with Roto-View and you have the ultimate solution for your business or personal use. The keyboard attaches magnetically to the RAM Keyboard Adapter allowing for quick and easy removal and replacement. |
 |
|
Adjustable
metal cradle with expanding sides that adjust and lock around many
GPS units. Maximum cradle width 4.5" Includes foam
cradle pads for protection, 1" ball on back |
|
|
|
100% Canadian. Canada's #1 GPS & More Store!
Holders:
